Cellebrite PA showi...
 
Notifications
Clear all

Cellebrite PA showing uploading payload file error

3 Posts
3 Users
0 Likes
543 Views
hcso1510
(@hcso1510)
Posts: 303
Reputable Member
Topic starter
 

I'm currently trying to obtain a physical acquisition off of an iPhone 4 CDMA version 6.1-6.1.2

As the phone is attempting to load up into DFU mode it gets to about stage 19 of 24 (roughly 78%) and then it stops. It then shows Error uploading a payload file It then directs me back to start over again. I've started over again multiple times.

I'm using version 3.6.5

Any advise would be greatly appreciated!

 
Posted : 08/03/2013 3:16 am
Mark_Eskridge
(@mark_eskridge)
Posts: 50
Trusted Member
 

I just had that same thing happen to me on an iPhone 4 GSM yesterday. First time I had seen that. Rebooted the phone and changed the cable, which made it work, but I don't know if it was one or the other that solved the issue.

 
Posted : 08/03/2013 4:39 am
triran
(@triran)
Posts: 99
Trusted Member
 

I just had that same thing happen to me on an iPhone 4 GSM yesterday. First time I had seen that. Rebooted the phone and changed the cable, which made it work, but I don't know if it was one or the other that solved the issue.

A similar issue can be caused by the USB you use, usually a power issue. Usually altering the port you use works.

 
Posted : 12/03/2013 7:14 pm
Share: