Join Us!

FRP Lock Bypass - F...
 
Notifications
Clear all

FRP Lock Bypass - FRP Hijacker  

  RSS
Thomass30
(@thomass30)
Active Member

Hello,
If someone of you guys tested this Program - FRP Hijacker to remove FRP lock and can confirm it doesnt affect in any way user data ?

I was thinking of flashing TWRP on SM-J500H but it has FRP Lock.

Quote
Posted : 23/09/2018 9:13 pm
arcaine2
(@arcaine2)
Active Member

I wouldn't trust this. You got a reply to use an UART based method. From my experience, resetting FRP via download mode is done by flashing custom userdata partition that'll give you a phone with bypassed setup wizard, which then you can factory reset to have FRP off.

UART method uses a bootloader exploit and does not wipe the data. A possible (you'd have to verify this) software for that would be Octoplus (or their FRP dongle), EFT, maybe BMT.

I can check tomorrow if Octoplus FRP dongle supports this model for UART based method.

// Edit

Octoplus FRP doesn't support this model for FRP removal over UART.

ReplyQuote
Posted : 23/09/2018 10:25 pm
Thomass30
(@thomass30)
Active Member

Thanks Arcaine you might be right about resetting FRP via download mode.

Where did you checked that this doesnt support SM-J500H ?

I checked this Octoplus FRP Tool on this site

https://multi-com.eu/,details,id_pr,22011,key,octoplus-frp-tool-usb-dongle,smenu,gsm.html

And my device J500H is there on a list of supported devices.

Also checked this here
https://octoplusbox.com/en/products/frp-tool/

and it is on the list of supported devices

When I remove this FRP Lock how can i make sure that this model has unlocked bootloader (to flash TWRP) since Samsung doesnt support Fastboot commands ?

ReplyQuote
Posted : 24/09/2018 10:13 am
arcaine2
(@arcaine2)
Active Member

Where did you checked that this doesnt support SM-J500H ?

Directly in software. I do have that dongle and it supports removing FRP only in download mode or using combination firmware for that specific model. Same goes for J500F/FN. First method may wipe the phone and i wouldn't try on live device. Second involve flashing full or partial combination firmware so you're gonna lose data as well.

When I remove this FRP Lock how can i make sure that this model has unlocked bootloader (to flash TWRP) since Samsung doesnt support Fastboot commands ?

From my experience, all non-US carrier Samsung phones have unlocked bootloader so as soon as you disable FRP (and enable OEM unlocking in recent devices) you can flash whatever you want.

ReplyQuote
Posted : 24/09/2018 5:37 pm
Thomass30
(@thomass30)
Active Member

Thank you very much Arcaine

I checked what you said on YouTube and in fact the UART Mode is grey out for this model.
It is only Download mode and ADB (Combination) mode available.

So I think Im not gonna flash antything because I cant remove FRP 😯
unless it's another way to remove that..

ReplyQuote
Posted : 24/09/2018 8:36 pm
passcodeunlock
(@passcodeunlock)
Senior Member

Hi Thomas!

There is a way to get a decrypted dump of the userdata partition in-lab, it doesn't matter if FRP is on or not.

Just it costs some money… You know my contacts if it is important )

ReplyQuote
Posted : 24/09/2018 8:45 pm
Thomass30
(@thomass30)
Active Member

Hi M.
I sent you an email.

ReplyQuote
Posted : 25/09/2018 2:57 pm
passcodeunlock
(@passcodeunlock)
Senior Member

I answered it )

ReplyQuote
Posted : 25/09/2018 8:18 pm
Share: