Nokia 100, type RH-...
 
Notifications
Clear all

Nokia 100, type RH-130 flash cable  

  RSS
Differentlayer
(@differentlayer)
New Member

Hello!
I am sitting here with a Nokia 100 typ RH-130. My plan was to do an extraction with the XRY v6.2 (the phone is supported). To my surprise there was no cable in the XRY- kit. In the support file MSAB advices me to by a flash cable elsewhere (www.gsmserver.com or www.fonefunshop.co.uk)

I belive the phone is a DCT 4 but I do not know which cable to order (maybe http//www.fonefunshop.co.uk/Unlocking/servicecables_nokia_5pin_dct4.htm ?).
There are 6 pins in the JTAG connector on the phone.

Please advice me.
Best regards
//D

Quote
Posted : 29/03/2012 3:18 pm
Coligulus
(@coligulus)
Active Member

I would probably go for this cable if I was having to buy one

http//www.fonefunshop.co.uk/cable_picker/96305_Nokia_101_7_pin_FBus_Service_Cable.html

The 7 PIN cables for SHU box have always worked for me in XRy with the RJ45 adapter and the Nokia 100 and 101 appear to be basically the same device. I think you will find this cable will work fine for you.

Hope this helps.

Colin

ReplyQuote
Posted : 29/03/2012 4:53 pm
alex101
(@alex101)
Active Member

I would probably go for this cable if I was having to buy one

http//www.fonefunshop.co.uk/cable_picker/96305_Nokia_101_7_pin_FBus_Service_Cable.html

The 7 PIN cables for SHU box have always worked for me in XRy with the RJ45 adapter and the Nokia 100 and 101 appear to be basically the same device. I think you will find this cable will work fine for you.

Hope this helps.

Colin

I would also use the same cable and if you speak to the very helpful guys at Fone Fun Shop that can always advise you of the best service cable.

ReplyQuote
Posted : 29/03/2012 8:20 pm
Differentlayer
(@differentlayer)
New Member

Thank You for Your respons.

//D

ReplyQuote
Posted : 30/03/2012 1:36 pm
Share: