Join Us!

Old Classic Mobile ...
 
Notifications
Clear all

Old Classic Mobile Phone - Samsung GT-E1050  

  RSS
Thomass30
(@thomass30)
Active Member

Hello,
I have classic Mobile Phone - Samsung GT-E1050 with screen PIN lock.

https://www.gsmarena.com/samsung_e1050-5556.php

Is there a way to bypass the lock ?

Or the only way to read the memory is via the chip-off or JTAG ?

Quote
Posted : 26/10/2018 9:01 pm
WOOLFGANG2000
(@woolfgang2000)
New Member

i think it is supported on z3x box to read all codes .

ReplyQuote
Posted : 26/10/2018 9:53 pm
passcodeunlock
(@passcodeunlock)
Senior Member

JTAG reading works, you can buy an adapter from multi-com.pl if you don't want to deal with a bit of soldering…

Ask the FF user Bolo for details )

ReplyQuote
Posted : 26/10/2018 10:23 pm
Thomass30
(@thomass30)
Active Member

Thanks for the clue )

ReplyQuote
Posted : 27/10/2018 12:44 pm
polar
(@polar)
Junior Member

Hmm… I didn't know it had JTAG.

Anyway, it is supported by XRY and Cellebrite as well as various flasher boxes.

ReplyQuote
Posted : 31/10/2018 10:36 am
xukca
(@xukca)
New Member

Z3X can easily read out the codes from it.

UNLOCK INSTRUCTIONS
Phone must be powered off!
1. Select correct COM port in 'Port' options.
2. Select connection mode in options ('Flash Mode' or 'TAT Mode') .
3. Press 'Unlock' for direct unlock.
4. Press 'Read Codes' to read security codes.
5. - Flash Mode
Connect the phone to selected port with UART cable and press 'Power' button shortly,
or just insert cable to phone if you are using auto-ignition cable .
(If you have connection problem, try to push 'Power' button while loader will be sent.)
- TAT Mode
Connect the phone to selected port with UART cable and press 'Power' button about 3 seconds,
or just insert cable to phone if you are using auto-ignition cable .
Done with Samsung Tool PRO v.34.3

ReplyQuote
Posted : 29/11/2018 8:14 am
Share: