Oxygen G965F S9+ Re...
 
Notifications
Clear all

Oxygen G965F S9+ Restarting "CMDLINE parameter modified"

Master-ZizO
(@master-zizo)
New Member

Hello there, i have S9+ G965F Locked with pin code , i tried on Oxygen Samsung Exynos Dump.
After model detection i pressed start extraction then Oxygen did the "Modified Image Upload Step"
then it asked my as usual to reboot the device .. then the device started on first logo and rebooting in loop with red line above the screen "Warning : CMDLine parameter modified"

Device Binary is 13 .. with firmware info from recovery mode " G965FXXSDFTL1"

Any help ?

Quote
Topic starter Posted : 07/04/2021 10:47 pm
Deltron
(@deltron)
Active Member

Does the software give any kind of error?

What does the software do?

ReplyQuote
Posted : 08/04/2021 6:35 pm
Master-ZizO
(@master-zizo)
New Member

@deltron no errors .. after Modfieid Image Upload step , Oxygen asks me to reboot to normal mode and phone keeps restarting in loop so oxygen doesn't detect it

ReplyQuote
Topic starter Posted : 08/04/2021 8:43 pm
OxygenForensics
(@oxygenforensics)
Active Member
Posted by: @master-zizo

Hello there, i have S9+ G965F Locked with pin code , i tried on Oxygen Samsung Exynos Dump.
After model detection i pressed start extraction then Oxygen did the "Modified Image Upload Step"
then it asked my as usual to reboot the device .. then the device started on first logo and rebooting in loop with red line above the screen "Warning : CMDLine parameter modified"

Device Binary is 13 .. with firmware info from recovery mode " G965FXXSDFTL1"

Any help ?

This device is not supported. To restore it to a normal mode please press Restore device option on the Samsung Exynos main screen in the Extrractor and follow the instructions. 

ReplyQuote
Posted : 09/04/2021 8:40 am
Master-ZizO
(@master-zizo)
New Member

@oxygenforensics yeah i think android 10 not supported
i removed the UFS Chip and dumped userdata partition .. anyway to extract it ?

ReplyQuote
Topic starter Posted : 10/04/2021 10:20 pm
Share: