I need your expert help on the above phone currently passlocked.
Using Cellebrite "4PC" which apparently supports this device via physical with passcode bypass.
I'm following the directions to get the phone in download mode, and once im there Cellebrite begins to dump the bin file. After it's done, I'll open the extraction in Physical Analyzer, and I get nothing, no analyzed data, data files, nada… I ran the extraction several times using different USB cables, USB ports, and even through the Cellebrite USB Console, all with the same results.
The phone runs on KaiOS (Don't have a version or security patch if it has that sort of thing)
Both Cellebrite and Physical Analyzer are updated to most recent versions.
Any suggestions?
I experienced the same problem and after talking with support ended up forwarding the extraction to Cellebrite for further examination. I was notified that it was sent to level 2 and level 3 for further exam. with no idea on turn around time for a possible solution. I have had several other 4044O phones come through since and continue to experience the same problem even with the newer version Ufed software.
Cellebrite has no support for KaiOS as far as I understand (and neither does any other major vendor). FinalData can parse and decode it so you might want to reach out to them for a trial to test. Let them know which device you are working with, but I know for sure they can do the 4044N with KaiOS. On the flip side, if your up to manually do it, check out this blog post
http//
The 4044 series phones run KaiOS 1.0. Not that that matters because the data is stored using the obsification method making it hard and annoying to deal with unless you have FinalMobile as a toolset.
The device itself can be extracted using ISP extraction or a chip off. But like previously stated, the only program that can parse the data is FinalMobile. Using Cellibrite's physical bypass only leads to 00 being extracted. We have found the only way to get all(most) of the data is to do the Chip or ISP extraction.
Only By CHIP off or ISP pinout but test againg this phone is Qualcomm connect (Phone in ON) and Power of and see charging phone …. Finnaly connect to tools and see diag port o force EDL MODE by commands