Forums
Main Category
General (Technical,...
Experience using TW...
 
Notifications
Clear all

Experience using TWRP/CWM to get Physical dumps Oxy??

 
General (Technical, Procedural, Software, Hardware etc.)
Last Post by SamBrown 8 years ago
4 Posts
3 Users
0 Reactions
1,207 Views
RSS
 Billsimp
(@billsimp)
New Member
Joined: 8 years ago
Posts: 3
Topic starter 28/03/2017 6:43 pm  

I have had a difficult time obtaining physical dumps on all android devices with Oxygen. I have had success using the specific physical data aq. protocols, but not through "Device Acquisition". I have yet to have the Adhoc root be successful nor logical extracts with rooting. One suggestion from Oxy was to use wither a third party root or boot in TWRP/CWM and attempt. Anyone have any experience doing this method?
If anyone has any tips for this process, I would greatly appreciate it. Using Oxy Detective.

Note I am not complaining about Oxy it is great, just need some assistance, if you haven't used the Cloud extractor, you are missing out.


   
Quote
 mcman
(@mcman)
Estimable Member
Joined: 15 years ago
Posts: 189
28/03/2017 7:43 pm  

Grab the latest version of Magnet ACQUIRE, we just added TWRP right into it so it might help walk you through it.

https://www.magnetforensics.com/magnet-acquire/

You'll have to grab the correct recovery image yourself but you can load it right into ACQUIRE. Make sure you follow the instructions properly and know the risks as this is a riskier acquisition than your standard backup.

Also you should be able to load our images into any other tool, doesn't have to be AXIOM/IEF. We don't create any proprietary formats so you should be able to dump it into Oxygen again afterwards if you want.

Hope that helps,

Jamie McQuaid
Magnet Forensics


   
ReplyQuote
 Billsimp
(@billsimp)
New Member
Joined: 8 years ago
Posts: 3
Topic starter 28/03/2017 8:45 pm  

Grab the latest version of Magnet ACQUIRE, we just added TWRP right into it so it might help walk you through it.

https://www.magnetforensics.com/magnet-acquire/

You'll have to grab the correct recovery image yourself but you can load it right into ACQUIRE. Make sure you follow the instructions properly and know the risks as this is a riskier acquisition than your standard backup.

Also you should be able to load our images into any other tool, doesn't have to be AXIOM/IEF. We don't create any proprietary formats so you should be able to dump it into Oxygen again afterwards if you want.

Hope that helps,

Jamie McQuaid
Magnet Forensics

Thank you, I just requested the community ACQUIRE to look at, I am waiting for confirmation.


   
ReplyQuote
SamBrown
 SamBrown
(@sambrown)
Trusted Member
Joined: 10 years ago
Posts: 97
07/04/2017 12:15 am  

If I flash TWRP to a phone, I usually just use the built-in terminal to dump the internal storage to an SD card or a USB stick with dd.


   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  
Share: