Helix3.0 - Issue in putting in server mode - plz help

I think for PRO you have to pay and the other one is free.

Be sure you assign the IP address on the Helix booted machine through the terminal. Flakey results have been reported if you try through the GUI.

Also consider Helix3 Pro initiates the iSCSI services on boot. You can connect using Microsoft's iSCSI initiator from your exam machine (but you still need a successful ping first). You may find better speeds using iSCSI over a gigabit connection.

Also - check the IP6 settings on the forensic laptop. I have had to disable it to have LinEn work properly.

Thanks all - for your help)