Hi,
Going out on a limb here, but has anybody (other than all the people on the internet and You Tube) done a successful JTAG on an Ace 2 (i8160) with a Riff Box?
I've been at it for a couple of days and just can not connect to the device! The box seems OK, it connects to the PC, got the latest firmware, Manager and DLLs… but nothing! I've followed every instruction and it just will not connect.
I tried a test phone, Galaxy Ace, it ran the resurrector, but when I came to try to read/write to the device this also failed?
Its all spanking new and the cable must work as the Ace did kinda connect.
I've tried it with and without USB connected, powered on / off. Windows XP and 7 (32bit and 64bit)
Any hints if I'm missing something glaringly obviously please tell me! (
Thanks,
4R
In order to connect with this phone, you need to have the battery in (or use the Cellebrite power cable set connected to the USB power on the RIFF Box and have it turned on in the Advanced settings); you also need a USB cable connected to your computer and the USB port on the device; so 2 sources of power; with it setup this way, press and hold the power button while you try and connect with the software; once you get the connection ("dead body" message) then release the power button. Also try the GPG JTAG Pro with this one.