Hello,
Away from office and need something that I can use to add directional beams from CDR records.
Sector 1, etc.
Not sure if anyone has any ideas of things that can readily be accessed for free.
Streets trips, Google, etc.
Thank you.
This any help
http//
The mathematical model predicts the radio transmission performance based on the following entries
•Transmitter site power
•Transmitter site line loss
•Transmitter site antenna gain
•Transmitter site antenna type (for coverage only)
•Transmitter site antenna azimuth (for coverage only)
•Transmitter site antenna tilt (for coverage only)
•Transmitter site antenna height
•Transmitter site latitude
•Transmitter site longitude
•Transmitter site ground elevation
•Elevation data records between the transmitter and the receiver sites (up to 2000 records)
•Land cover data records between the transmitter and the receiver sites (up to 2000 records)
•Receiver site latitude (for link only)
•Receiver site longitude (for link only)
•Receiver site ground elevation (for link only)
•Receiver site antenna gain
•Receiver site antenna height
•Receiver site line loss
•Receiver site sensitivity (corresponds to the receiver threshold)
•Required reliability (The percentage of time where the signal must be above the threshold to consider a link to be liable).
•Color for a successful reception (for coverage only)
•Strong signal margin (for coverage only)
•Color for a successful reception with a strong signal (for coverage only)
•Transparency of the ground overlay (for coverage only)