Nokia 105

UFED, XRY?

Hi all,

Anyone please advise with obtaining an extraction from a nokia 105 handset? Method and tools used (preferably free) would be appreciated.

Thanks in advance

Well Juniper I doubt there will be any free tools. UFED and XRY will sure do it else you will need nokia flasher such as ATF read PM and/or Flash and try manual decoding. Another software that can help for decoding is Sanderson PMexplorer (if you can find it on Internet).

Regards
Adnan

Also note that there are two models which carry the name 105 the 2013 version uses Series 30 (Infineon); the 2015 (Microsoft) version is based on Series 30+ (MediaTek).

Thanks guys,

Appreciate your help.
Looking into UFED as an option…

Thanks

Neither XRY or UFED support extracting a physical read of this handset (105 v2013). AFT is the quickest and simplest device for extracting the memory from this handset (around 3 mins). Then you should look to open the resultant binary file in UFED, XRY etc…
I've not attempted the new 105 v2015 yet but being MTK should be fairly straight forward.

Examination depends upon the model
RM-908 Nokia 105
RM-1133 Nokia 105 Dual sim
RM-1134 Nokia 105 Single sim

Nokia RM-908 can be downloaded with a Service Cable. FoneFunShop should be able to supply.

The 1133 / 1134 service cable should be available Next week.

Nokia 105-2 RM-1133 and RM-1134 csame in stock today guys

https://www.youtube.com/watch?v=QLfHuW1-UuY

http//www.fonefunshop.co.uk/cable_picker/99627_Nokia_105-2_USB_Fbus_Flash_Service_Cable_For_Nokia_RM-1134.html

Came back to this after a while - not getting a much out of ATF with this - does anyone have a step by step guide to getting the SMS and contact info on this phone using ATF - Maybe I'm doing something wrong using the ATF Software.

Thanks in advance

not used it with atf, but this is procedure we tested on infinity best dongle

Method

Connect cable to usb port on pc and phone, power on phone

Phone is detected

Press read flash

Phone reboots into usb rom mode

Drivers installed

Flash read ok

Use UFED physical analyzer to decipher the dumped .bin file

RM-1133 and RM-1134 was not listed as a supported model on EFED, but if you treat it as a nokia 108 it will work