Does anyone have any information on taps for the Nokia Lumia 630? I just received one of these and I processed it with UFED Ultimate and Oxygen, neither was able to get the information we are looking for, specifically text messages. UFED only supported a file system extraction which only contained images and videos, and no other files to even try and carve the messages from. Oxygen pulled the call logs, images and videos but still no texts.
The phone is using the Qualcomm msm8226 chip which is supported by RIff; however, I cannot locate any info regarding the taps. I don’t have a test phone to try and probe for the taps either.
Any information would be greatly appreciated,
Thank You,
Det. J. Diamond
I have the same problem, I would try to read the memory with atf box but I do not have the jtag wiring diagram. Have you some suggestions?
I saw a post on the GSM hosting form recently for this model and the product manager for Advanced Turbo Flasher replied along the lines that you can follow this guide and when you get to step 3 you click read instead of write http//
I'm assuming you will need to download the related files to the handset (as seen in step 2) from here http//
I have never tried this method with the ATF box, I'm more of a fan of the RIFF box. Maybe the files downloaded in the link above will include a picture of the JTAG points for the Lumia 630 so you could use the RIFF instead possibly.
EDIT
I have downloaded the file for Nokia Lumia 630 (RM-976), it has provided me with test points needed to read the eMMC directly.
If you can not find the taps on this phone. I've done chip off on a couple Lumia phones and they are not too hard if you have the equipment. Cellebrite does a good job parsing out the .bin file from these phones using the Windows 8 chain.
EDIT
I have downloaded the file for Nokia Lumia 630 (RM-976), it has provided me with test points needed to read the eMMC directly.
Can you please provide a link or a picture? Thx.
Hi all,
Has anyone managed to get a memory read from the Lumia 630 using the test points to read the eMMC?
I think my soldering is good but the points are tiny and I can't get a read using ATF JTAG or RIFF.
Thanks…….
EDIT
I have downloaded the file for Nokia Lumia 630 (RM-976), it has provided me with test points needed to read the eMMC directly.Can you please provide a link or a picture? Thx.
Sorry for the late response, are you still in need of this picture? just that I will have to go looking for it again as I have had to re-install the operating system on my laptop.