Hello,
I have classic Mobile Phone - Samsung GT-E1050 with screen PIN lock.
https://
Is there a way to bypass the lock ?
Or the only way to read the memory is via the chip-off or JTAG ?
i think it is supported on z3x box to read all codes .
JTAG reading works, you can buy an adapter from multi-com.pl if you don't want to deal with a bit of soldering…
Ask the FF user Bolo for details )
Thanks for the clue )
Hmm… I didn't know it had JTAG.
Anyway, it is supported by XRY and Cellebrite as well as various flasher boxes.
Z3X can easily read out the codes from it.
UNLOCK INSTRUCTIONS
Phone must be powered off!
1. Select correct COM port in 'Port' options.
2. Select connection mode in options ('Flash Mode' or 'TAT Mode') .
3. Press 'Unlock' for direct unlock.
4. Press 'Read Codes' to read security codes.
5. - Flash Mode
Connect the phone to selected port with UART cable and press 'Power' button shortly,
or just insert cable to phone if you are using auto-ignition cable .
(If you have connection problem, try to push 'Power' button while loader will be sent.)
- TAT Mode
Connect the phone to selected port with UART cable and press 'Power' button about 3 seconds,
or just insert cable to phone if you are using auto-ignition cable .
Done with Samsung Tool PRO v.34.3