Samsung Star, Tocco...
 
Notifications
Clear all

Samsung Star, Tocco Lite or Avila

5 Posts
4 Users
0 Reactions
1,539 Views
 LC6
(@grigollo)
Eminent Member
Joined: 8 years ago
Posts: 27
Topic starter  

I need to recover data and remove password from a Samsung GT-S5230, with Samsung Star operating system, Tocco Lite or Avila. The cellebrite and the paraben did not resolve. I need alternative suggestions for extraction and recovery. tks


   
Quote
UnallocatedClusters
(@unallocatedclusters)
Honorable Member
Joined: 13 years ago
Posts: 576
 

Here is a link to Samsung desktop software for the phone

https://www.samsung.com/uk/support/model/GT-S5230BDAXEN/

Perhaps you could use the Samsung desktop software to make a backup of the phone.


   
ReplyQuote
(@arcaine2)
Estimable Member
Joined: 9 years ago
Posts: 239
 

If you have unlock boxes, like z3x then those were able to reset usercode back to default one - 00000000.


   
ReplyQuote
(@polar)
Eminent Member
Joined: 15 years ago
Posts: 48
 

* The handset lock code can usually be extracted using the following AT command AT+PHLOCK.
* If the AT command doesn't work, but you have a flash dump, the code is stored in ASCII, surrounded by \x00s, often close to the ICCID of the last used SIM card. Try searching for (?<=\x00{100})[0-9]{4,8}(?=\x00{100}).
* Some flasher boxes allow you to read the lock code.
* If that fails too, some flasher boxes let you reset the code to 00000000, as mentioned previously.


   
ReplyQuote
 LC6
(@grigollo)
Eminent Member
Joined: 8 years ago
Posts: 27
Topic starter  

When I try to access the folders, they have a password. When I connect the cable to the PC via USB, it also asks for password. But I am unable to remove this password. I already tried what they suggested in this topic, but it doesn't work.


   
ReplyQuote
Share: