Has anyone used a cable like
This is for a family friend and I cannot really use lab resources so thanks for DeepSpar suggestions but I am not going to buy one for personal use. And they cannot afford $500+ for recovery, but would be willing to buy a cable or some relatively inexpensive tool if anyone can suggest one.
Thanks
Hello.
I made one of these cables myself using a specific Nokia cable.
I did not use it for forensic purposes, just to change some of the internal settings of the Hard Drive for testing in the lab.
I'll try and fish out the info you require.
Simon
These should get you started
http//
http//
s1lang,
Thanks for the links. I found several similar. When looking for the recommended DKU-5 Cable I found several pre-made cables like the one I linked in my post. I also found several posts that recommended using a CA-42 cable and not the DKU-5. I do not want to brick the drive so that is why I was considering a pre-made cable. There is always a lot of info on the Internet, so I am glad to hear from someone that made it work.
Here is the cable I buy for the drives price is right they are a good vendor
http//
Here is the cable I buy for the drives price is right they are a good vendor
http//www.serialstuff.com/products/Prolific-USB-to-TTL-Logic-Cable.html
Drat - foiled again
Prolific USB to TTL Logic Cable
Price
$9.95
SKU
USB-BPTTL
Sorry but this item is currently unavailable.
Please check back at a later stage.
Bithead a quick google and more vendors carry this cable. Also on amazon http//